Bottle-top dispenser Assimat

Assimat

Dispenser Assimat

1.0 - 10 ml

Order no.:

40163010
Specifications
Volume: 1.0 - 10 ml
Division: 0.2 ml
Accuracy: ≤ ± 1.2 %*
Coefficient of variation: ≤ 0.2 %*
Price per Piece:
1 pc.
125,00 €
Prices in EURO (€), net, plus VAT
Description

The economic dispenser for the daily routine
-  economical dispensing of non-aggressive liquids
-  easy cleaning and maintenance
-  all wearing parts, pistons and cylinders as well, are easily replaceable
-  accurate volume adjustment, easy to read
-  dispensing cartridge replaceable - spare cartridge is included
-  dispensing cartridge is filled automatically by the lifting effect of a spring which pushes the piston up
-  attachable to bottles with thread GL 45

All parts which come in contact with liquids are made of polypropylene (PP), polyethylene (PE) and
ethylene-propylene-diene rubber (EPDM). This allows precise dispensing of many common media -
see Chemical resistance under "Download data sheet".

Limitations of use
Liquids which do not affect the materials of the device can be dispensed with respect to the following limits:
-  viscosity: up to 150 mm²/s (10 ml) or up to 75 mm²/s (25 ml)
-  vapor pressure up to 500 mbar
-  density up to 13.6 g/cm³
-  temperature up to +40 °C (104 °F)

Liquids that should not be dispensed include e.g. concentrated or oxidizing acids, non-polar solvents
like hydrocarbons and halogenated hydrocarbons.

* Final test values refer to the nominal volume (max. volume), which is imprinted on the device, at same temperature
   +20 °C (68 °F) of device, surrounding and distilled water as well as at smooth, jerk-free operation.

Consisting of
1 Assimat No. 40163...
2 dispensing cartridges No. 40164...
1 discharge tube No. 40165001
1 filling tube No. 40165...
2 adapters of PP (GL 45/32 and GL 45/S 40)
Directions for use   (w i t h o u t  bottle)

2.5 - 25 ml

Order no.:

40163025
Specifications
Volume: 2.5 - 25 ml
Division: 0.5 ml
Accuracy: ≤ ± 1.2 %*
Coefficient of variation: ≤ 0.2 %*
Price per Piece:
1 pc.
148,00 €
Prices in EURO (€), net, plus VAT
Description

The economic dispenser for the daily routine
-  economical dispensing of non-aggressive liquids
-  easy cleaning and maintenance
-  all wearing parts, pistons and cylinders as well, are easily replaceable
-  accurate volume adjustment, easy to read
-  dispensing cartridge replaceable - spare cartridge is included
-  dispensing cartridge is filled automatically by the lifting effect of a spring which pushes the piston up
-  attachable to bottles with thread GL 45

All parts which come in contact with liquids are made of polypropylene (PP), polyethylene (PE) and
ethylene-propylene-diene rubber (EPDM). This allows precise dispensing of many common media -
see Chemical resistance under "Download data sheet".

Limitations of use
Liquids which do not affect the materials of the device can be dispensed with respect to the following limits:
-  viscosity: up to 150 mm²/s (10 ml) or up to 75 mm²/s (25 ml)
-  vapor pressure up to 500 mbar
-  density up to 13.6 g/cm³
-  temperature up to +40 °C (104 °F)

Liquids that should not be dispensed include e.g. concentrated or oxidizing acids, non-polar solvents
like hydrocarbons and halogenated hydrocarbons.

* Final test values refer to the nominal volume (max. volume), which is imprinted on the device, at same temperature
   +20 °C (68 °F) of device, surrounding and distilled water as well as at smooth, jerk-free operation.

Consisting of
1 Assimat No. 40163...
2 dispensing cartridges No. 40164...
1 discharge tube No. 40165001
1 filling tube No. 40165...
2 adapters of PP (GL 45/32 and GL 45/S 40)
Directions for use   (w i t h o u t  bottle)

Accessories for Assimat

Dispensing cartridges

for 10 ml

Order no.:

40164010
Specifications
For Assimat: 10 ml
Pack: 3 pieces
Price per Pack:
1 pc.
21,70 €
Prices in EURO (€), net, plus VAT
Description

consisting of piston (PE) and cylinder (PP)

for 25 ml

Order no.:

40164025
Specifications
For Assimat: 25 ml
Pack: 3 pieces
Price per Pack:
1 pc.
31,90 €
Prices in EURO (€), net, plus VAT
Description

consisting of piston (PE) and cylinder (PP)

Discharge tubes

Discharge tubes

Order no.:

40165001
Specifications
For Assimat: 10 ml and 25 ml
Price per Pack:
1 pc.
16,80 €
Prices in EURO (€), net, plus VAT
Description

of polypropylene, standard type (for 10 and 25 ml), individually packed

Filling tubes

250 mm

Order no.:

40165002
Specifications
Length: approx. 250 mm
Pack: 2 pieces
Price per Pack:
1 pc.
3,85 €
Prices in EURO (€), net, plus VAT
Description

of polypropylene

500 mm

Order no.:

40165003
Specifications
Length: approx. 500 mm
Pack: 2 pieces
Price per Pack:
1 pc.
5,55 €
Prices in EURO (€), net, plus VAT
Description

of polypropylene

Valve sets

Valve set

Order no.:

40165004
Specifications
For Assimat: 10 ml and 25 ml
Price per Pack:
1 pc.
16,65 €
Prices in EURO (€), net, plus VAT
Description

consisting of: 1 filling valve, 1 discharge valve and 2 seals

News and events

Exhibitions

more...

Product novelties

Alarm thermometers with immersion probe: learn more here

 

Alarm thermometers with insertion probe: learn more here

 

Temperature controls: learn more here

News

NEW! Discover our new articles to the treatment of the manual medicine

 

NEW! Discover our new Dispensette® S - here!

 

 

 

Price list 2017 - You will find our new price list in the download section.

 

Renewal of our ISO 9001 Quality-Certificate - the current certificate can be downloaded here.

 

 

 

Glaswarenfabrik Karl Hecht GmbH & Co KG
97647 Sondheim/Rhön
Tel.: +49 (0) 9779 808-0
Fax: +49 (0) 9779 808-88
E-Mail: E-mail: info@hecht-assistent.de
© 2011 Glaswarenfabrik Hecht